|
Beyond
to the normal standard operations can be realized custom-made personalized
programs tailored on customers demand.
EAC-ARM System - Armors Transfer
A frequent operation in weaving room is to predispose the movement
of the licci of the loom in relation to items to be produced. In
modern looms this is obtained through electronical ratiera; programming
of the ratiera can be made more frequently directly to chassis
or using an appropriate programmer, predisposed from the constructor
of the loom or of the ratiera, on which can be inserted and recorded
more designs. The programming of the looms is made therefore transferring
from the portable programmer the necessary armor. OMG has realized
a particular card, called ARM-197, that has to be inserted inside
TXC-1T equipment of the control data system OMG - EACTEX, that
allows to directly transfer the armors from the PC that manages
the armor designs. ARM-197 Card is controlled from the micro-processor
of TXC - 1T equipment and it can manage 2 serial lines, one towards
MULTIPOINT net in RS 422 to the armors’ management PC, and
one towards the interface of the loom; this last one is configurable
in RS 232, RS 422, RS 485, CURRENT LOOP; these configurations covers
all the several types of looms actually on the market. The fundamental
characteristic of the card is to be completely independent from
the protocol used for transfering of the designs of armor and the
eventual parameters of the article in job. This is obtained with
an appropriate SET ARMOR command carried out from the PC, with
this command the ARM-197 card allows direct connection between
the PC and loom, allowing to use the specific program supplied
from the constructor. The Eac-Arm software also manages procedures
for the transfering of the armors from PC to looms, and eventually
reverse operations, allows the management of the archives on which
the armors of several articles reside.
|
EAC-TEX Weaving - System
EAC-TEX is the result of studies and researches finalized to weaving
units duties. It’s a bidirectional system that allows the
elaboration of the productive values, of the interferences and
of the working forecasts of weaving machines, through complete
survey of selected information. Every detector TXT-1T device is
connected to the main chassis and from this, through the serial
line, to the peripheral unit (Windows Personal Computer). This
last one can be connected to the central processing unit (Host
Computer) to permit the centralized management of whole weaving
deparment. In this manner the EAC-TEX system becomes an effective
check-up instrument, since collected data are a clear and exhausting
aid for the production responsibles.
EAC-TEX assists them in controlling and upgrading, for a constant
maintenance and improvement in the outcomes deriving from the unit.
- Data capturing in real time.
- Automatically changes Job turn.
- Reports printing: end of turn, daily, weekly, monthly.
- Automatically manages warp changing and determines waiting
and intervention times with a precise codify of the keys.
- It allows to program the warps (warped and warping) according
to the real yields of production and to the consequent forecasts.
- With the aid of the keyboard and keys shortcuts allows to
know the real causes that have determined machine-stops, timing
and reasons of waits, the warp changes, the pauses outside
turn, etc and identifying the operators that have carried out
the operations.
   |
